|
|
|
|
Assemble the Frame
|
| Now it is time to put that frame together! Lay down your top
and bottom pieces on the floor along with 2 of your 93 inch
pieces as shown. This will be much easier if they are placed
on a flat surface. Now grab your drill and using the philips
head drill bit and the 3" screws, fasten the top and bottom
studs to two of the 93 inch 2x4s. |
|
| Now you can place the remaining 93 inch
studs inside of the frame. Line them up with
your marks and screw them in one at a time. When your
are finished, the frame should look something like this: |
|
Next:
Marking Plywood
|
|
|
