Upcoming Events
TBC NEWS

rock climbing holds home page
rock climbing hold products

New rock climbing holds
Bouldering rock climbing holds
STARTER SETS rock climbing holds
Climbing holds for children!
SCREW ON rock climbing holds
JUGS rock climbing holds
CRIMPS rock climbing holds
INCUT rock climbing holds
Big climbing holds
NOVELTY rock climbing holds
rock climbing holds HARDWARE
Three Ball Climbing shipping info

Climbing Wall Plans
About Three Ball rock climbing holds
climbing pics and videos
Contact Three Ball Climbing
Related Sites
CLIMBING WALL PLANS








SUPPLIES NEEDED

Nominal size vs. actual size of building materials:

The designated dimensions of lumber is not its' true size. Lumber is designated by its' nominal value, or the size of the lumber before it is planed down to its' finished size. be sure to use the actual size when you are planning your walls dimensions. For example, as you can see in the table below, a 2"x4" actually measures 1 1/2" by 3 1/2". For plywood, nominal size and actual size are the same.

NOMINAL SIZE ACTUAL SIZE
2"x4"1 1/2"x 3 1/2"
2"x6"1 1/2"x 5 1/2"
2"x8"1 1/2"x 7 1/2"
2"x10"1 1/2"x 9 1/2"


  • Two - 4'x8'x3/4" sheets of plywood
  • Twenty - 96" (96 inches long) 2"x4"s
  • (100) 3/8-16 T-nuts per 4x8 sheet of plywood.
  • 5lb box of 2 1/2 inch #8 DeckMate screws
  • 2lb box of 3 1/2 inch #8 DeckMate screws
  • 5lb box of 2" #8 DeckMate screws
  • 12 Right angle metal brackets (optional)
  • One sheet 80 grit sandpaper (optional)
  • If you are using 4 prong t-nuts you'll need
    One tube Barges All Purpose Cement.
    You need this to glue the t-nuts to the back of the
    wall. Any glue that bonds to both metal and wood will do.
  • Round Base t-nuts do not require glue.

Round Base T-nuts

Heavy duty 3/8"-16 zinc plated t-nuts.


Round Base T-nuts

(Orders for Round Base T-nuts also include the necessary zinc plated screws for installation)
T-nuts Quantity
Special Instructions:





T-nuts Quantity
Freebie?
Special Instructions:

Next: Getting Started