Upcoming Events
TBC NEWS

rock climbing holds home page
rock climbing hold products

How To

FAQ
New rock climbing holds
Bouldering rock climbing holds
STARTER SETS rock climbing holds
Climbing holds for children!
SCREW ON rock climbing holds
JUGS rock climbing holds
CRIMPS rock climbing holds
INCUT rock climbing holds
Pinch climbing holds
sloper climbing holds
Big climbing holds
NOVELTY rock climbing holds
rock climbing holds HARDWARE
Three Ball Climbing shipping info

Climbing Wall Plans

About Three Ball rock climbing holds

climbing pics and videos

Contact Three Ball Climbing
Related Sites

Climbing Holds  >   Kids Climbing Grips  >   Kids Beginner Grips

Leapers climbing grips

Leapers

Pure Polyurethane

Bolt-on Rock Climbing Holds:

climbing on kids rock wall



  • Incut Climbing Holds, some might call them "mini-jugs"

  • How challenging are these grips?
    Leapers are Comfy Incut Ledges. They are great for setting easy routes for kids on vertical climbing walls. They are also great as intermediate kids holds on overhanging walls.

  • How many grips do I need?
    For each vertical route you create we recommend using one hold per vertical foot (If your wall is 15 feet high you'll need about 15 grips). If you want to create 3 routes, each one 8 feet high, you'll need about 24 grips.

  • Are there any age or weight restrictions?
    Nope! These grips can be used whether you are 2, or 92 yrs old, 20 lbs or 500 lbs.

  • Climbing shoes are not required.

  • Made with Pure Rigid Urethane.


  • Diego is using this set on a slightly overhanging climbing wall (70 Degrees)




We only make quality climbing holds.
5 Pack Hardware Options:
Wall Size
Color Options:
Special Instructions
10 Pack Hardware Options:
Wall Size:
Solid Color Options:
Or... Mixed colors please:
Special Instructions
100 Pack Hardware Options
Wall Size
Solid Color Options:
Or... Mixed colors please:
Special Instructions


What is the difference between
Bolt-on holds and Screw-on holds?

http://www.threeballclimbing.com/what is the difference between bolt on and screw on climbing holds

Bolt-on holds generally have one anchor point. They require 3/8" socket-head bolts and the installation of 3/8" T-nuts in the back of the wall. Once the T-nuts are installed, fastening and removing the holds is extremely easy. All you need is a 5/16 hex key/wrench.





Bolt-ons are best if you intend to move the holds and change the routes several times a year.


Screw-on holds always have at least 2 anchor points. The pre-cast holes in each hold are 1/4" in diameter. We use 2" weather resistant Deck Mate screws to fasten them to the wall. You will need a power drill with a philips head bit to install and remove these holds.

Screw-ons are great for outdoor applications because they require almost zero maintainance to remain secure. If you do not intend to change hold positions and create new routes frequently, screw-ons are the way to go.



What is a T-nut?
Screw on Holds - Novelty Climbing Holds - Hardware for climbing holds - Shipping Information - Climbing Wall Plans - About Us - Pics & Vids - Contact Us - Related Sites