Upcoming Events
TBC NEWS

rock climbing holds home page
rock climbing hold products

How To

FAQ
New rock climbing holds
Bouldering rock climbing holds
STARTER SETS rock climbing holds
Climbing holds for children!
SCREW ON rock climbing holds
JUGS rock climbing holds
CRIMPS rock climbing holds
INCUT rock climbing holds
Pinch climbing holds
sloper climbing holds
Big climbing holds
NOVELTY rock climbing holds
rock climbing holds HARDWARE
Three Ball Climbing shipping info

Climbing Wall Plans

About Three Ball rock climbing holds

Contact Three Ball Climbing
Related Sites

Climbing Holds  >   Jugs  >   Kids Climbing Grips  >   Kids Beginner Grips

Sagan Bolt on Jugs

Sagan Bolt Ons

Bolt on climbing holds, (5 different shapes)


Sagan Bolt on Jugs

*New Color Options*
  • To help increase shipping speed, we've decided to keep stock of our most popular colors (Red, Blue, Green & Orange)
  • Orders for Non-Stocked colors will need to be manufactured. Please allow 2-3 days for production.

  • How challenging are these grips?
    Our Sagan Jugs are super easy and comfy. They are great for setting easy routes or moves on just about any climbing wall.

  • These holds are bigger and easier than all our smaller Jugs (Frogs, Waves and Core).

  • How many grips do I need?
    For each vertical route you create we recommend using one hold per vertical foot (If your wall is 15 feet high you'll need about 15 grips). If you want to create 3 routes, each one 8 feet high, you'll need about 24 grips.

    For Toddlers we recommend twice as many (at least 2 grips per vertical foot for each route).

  • Are there any age or weight restrictions?
    Nope! These grips can be used whether you are 2, or 92 yrs old, 20 lbs or 500 lbs.

  • Climbing shoes are not required.

  • Made with Pure Rigid Urethane.
  • Released 2015/09/08



T-nuts 7 inch grid
5 Grips:
Wall Size (Panel Thickness)
Stock Color Options:
Non-Stock Color Options
Special Instructions
10 Grips:
Wall Size (Panel Thickness)
Stock Color Options:
Non-Stock Color Options
Special Instructions
40 Grips:
Wall Size (Panel Thickness)
Stock Color Options:
Non-Stock Color Options
Special Instructions


What is the difference between
Bolt-on holds and Screw-on holds?



Bolt-on holds generally have one anchor point. They require 3/8" socket-head bolts and the installation of 3/8" T-nuts in the back of the wall. Once the T-nuts are installed, fastening and removing the holds is extremely easy. All you need is a 5/16 hex key/wrench.

Screw-on holds always have at least 2 anchor points. The pre-cast holes in each hold are 1/4" in diameter. We use #8 and #9 weather resistant Deck Mate screws to fasten them to the wall. You will need a power drill with a #3 philips head bit to install and remove these holds. Because the hardware is so much cheaper, screw-on holds are the way to go if you are on a budget.



What is a T-nut?
Shipping Information - Climbing Wall Plans - About Us - Contact Us