TBC NEWS

rock climbing holds home page
rock climbing hold products

How To

FAQ
New rock climbing holds
Bouldering rock climbing holds
STARTER SETS rock climbing holds
Climbing holds for children!
SCREW ON rock climbing holds
JUGS rock climbing holds
CRIMPS rock climbing holds
INCUT rock climbing holds
Pinch climbing holds
sloper climbing holds
NOVELTY rock climbing holds
rock climbing holds HARDWARE
Three Ball Climbing shipping info

Climbing Wall Plans

About Three Ball rock climbing holds

Contact Three Ball Climbing





















New Climbing Holds & Training Equipment:




    2"x6" Single Hand Nunchuks:

  • 2 Inch Diameter
  • 6 Inches long
  • 100 grit sandstone texture.
  • 3/8" Eye Bolts.
  • Pure Polyurethane Composition.
  • If you are going to do Pull-Ups and Lache's, you don't need the 8" Nunchuks. These 6" guys will do the job.
  • If you plan to use these guys to push the limits, set them up for some single arm swings... #itsnoteasy.
  • Designed by Steve Dison
  • Released 2016/12/01.

Single Hand Nunchuks :D #tryhardfalloff #threeballclimbing #flexitout #itsforfun

A video posted by Three Ball Climbing (@threeballclimbing) on

Single hand #nunchuks ? Been wanting to do a line of these for a while now :D #tryhardfalloff #2x6nunchuk #201612

A video posted by Steve Dison (@ninjamonkey1221) on



1 Pair:
Stock Color Options:
Non-Stocked Colors:
Special Instructions
Graff Rails:
Graff Rails 003
Graff Rails 001 Graff Rails 002

  • Graff Rails
  • 12 Inches long
  • 7/8" Depth.
  • Why call them "Graff" Rails? Steve designed these guys in collaboration with Jessie Graff and the "Godfather" of American Ninja Warrior, David Campbell. They were designed to match the specs of the smallest rails on the Cliffhanger obstacle.
  • One side to be slick and very tough, and the other side has 120 grit texture. You choose how difficult you want them to be.
  • Fasten to just about any wood or concrete surface with the screws provided. (on your climbing wall, above the doorway, on the cinder block wall outside, etc etc.)
  • Built to last with Pure Rigid Polyurethane.
  • Released 2016/11/17.

Quality Climbing Holds


1 Rail, Hardware Options:
Stock Color Options:
Non-Stocked Colors:
Special Instructions
Doorway Limiter Prototype 02

  • 10" Long
  • 2" Width
  • Difficulty... Extreme
  • This is the 2nd version of the Limiter Steve has designed for people who want to get strong for the Vertical Limit obstacle.
  • This product is designed specifically for use in the doorway as you can see in Erica's vid.
  • These guys are glossy and Very tough to hang from. Steve is working on a 3rd version that will have sandstone like texture and be much easier. If you think this #2 version might be too hard, give us a couple weeks and we'll have the #3 version ready :)
  • The groove cut into the base is 1/2" deep to allow it overlap the 'Stop' strip that usually runs along the center of the doorway.
    This product must overlap the 'Stop' for the screws to be securely imbedded into the header of the doorway.
  • This product must be installed with the (6) #9 x 3.5 inch screws that will be included.

  • Released 2016/10/04.




3 Pack Hardware Options:
Stock Color Options:
Special Instructions
8" Pegs:
Ninja Warrior Pegboard Pegs Steel Pegs for Pegboard Training

  • Steel Pegs
  • 8 Inches long
  • 1.25" Diameter.
  • We're all about making stuff that will LAST!
  • If you've used oak dowels for pegboard training you know how quickly they get dented and start to wear out.
  • After cutting, the edges of these pegs are ground down and polished to removed and sharp edges.

  • For the 'Do-it-yourselfers' out there, the main cost we encounter is the labor relative to polishing. The steel itself is not expensive. If you've got the time and equipment just find an industrial metal supplier and ask for the size 'Tubing' you'd like :) (Pipe is described by inner diameter, tubing is described by outer diameter)
  • Released 2016/07/25.


Quantity
Special Instructions
    Candles:

  • 6" Long, 1" Diameter
  • New Gentle Texture. Flares and Candles feature a new surface texture we're pretty happy with. Instead of a rough sandstone type surface like most of our products, these guys have very fine dimpled wood grain. It's pretty smooth, but the dimples allow you to grip more easily. With chalk they feel really easy to grab and without chalk they can feel slick.
  • Designed for Kids: The diameter of the Candles is best for kids. They are kinda painful for adult hands. The 6" length leaves plenty of room for kids to get both hands on them. The texture is much more gentle on your skin.
  • Eye-Bolts are 3/8"
  • Made with pure polyurethane.
  • Designed by Steve Dison.
  • Released 2015/04/10.
Flares Dimensions

(2 Pack) Accessory Options:
Stock Color Options:
Special Instructions
Gripping Candle with one hand
90 Degree Pegboard Peg Receivers
    90 Degree Peg Receivers:

  • We originally posted the prototype of this idea back in August of 2015, and now we've got the production mold done!!
  • Use these Peg receivers just about anywhere. Each one can be purchased with wood deck screws or masonry screws and can be fastened to wood or concrete surfaces.
  • If you fasten to a wood surface make sure it is at least 3/4" thick.
  • The Hemisphere is 4" Diameter, small enough to pinch on overhanging walls and big enough to use as a challenging sloper on vertical walls.
  • The texture on these guys is a very fine 200 grit :)
  • Designed for 1.25" Diameter pegs.
  • The depth of the hole is 3".
  • Pegs available separately.
  • Designed by Steve Dison.
  • Released 2015/12/16.


1 Receiver
Color Options:
Special Instructions:
Right Arm Nunchuk 01
Right Arm Nunchuk 02
    Rocket:

  • While the Cowbell (pictured in orange above) works as a difficult component in suspended obstacles, it was designed for pull-ups and grip strength training. We decided to go ahead and design a new product specifically for use in challenging obstacles. We call it 'Rocket'.
  • The diameter of the most narrow point is about 3.25 inches.
  • The height of the grip area is 7.75 inches so there's plenty of room for both hands.
  • Like the Cowbell, the base is 5 inches in diameter.
  • We've also added a rounded glossy slippery top so, No Cheating!
  • Seamless. Designed by Steve Dison.
  • Eye bolts are 3/8" drop forged with a safe working load of 1200lbs.
  • Made with pure polyurethane.
  • Released 2015/10/26.
Right Arm Nunchuk 03

Quantity
Color Options:
Special Instructions




3 Inch Peg Balls

Quantity
Color Options:
Special Instructions
    Peg Balls

  • 3" Diameter
  • 120 Grit Textured Surface.
  • Built to last with Steel Pegs.
  • Pegs are 1.25" in Diameter and protrude 3.5 inches.

  • Seamless Grip Area.

  • The 3 Inch is an excellent size for adults to start with. They are a bit harder to use, and will test your grip strength a bit more than pegs alone. If the pegs are gettin too easy for you these guys will give you a little more of a challenge :)
  • Balls are made with pure polyurethane.
  • Designed by Steve Dison.
  • Released 2015/09/03.




3.5 Inch Peg Balls

Quantity
Color Options:
Special Instructions
    Peg Balls

  • 3.5" Diameter
  • 120 Grit Textured Surface.
  • Built to last with Steel Pegs.
  • Pegs are 1.25" in Diameter and protrude 3.5 inches.

  • Seamless Grip Area.

  • The 3.5 Inch is an excellent size for adults with bigger hands to start with. They are a bit harder to use than the 3 inchers, and will test your open hand grip strength a lot more than pegs alone.
  • Balls are made with pure polyurethane.
  • Designed by Steve Dison.
  • Released 2015/09/03.




3.5 Inch Diameter Glossy Peg Balls

Quantity
Color Options:
Special Instructions
    Impossible Peg Balls

  • 3.5" Diameter
  • Slick Glossy Surface.
  • Built to last with Steel Pegs.
  • Pegs are 1.25" in Diameter and protrude 3.5 inches.

  • Seamless Grip Area.

  • This is the most challenging Peg Ball we make.
  • These guys are NOT for beginners. If you haven't used Peg Balls or Impossiballs before we recommend starting out with the textured version.
  • This product will challenge your open-hand grip strength like no other!
  • Balls are made with pure polyurethane.
  • Designed by Steve Dison.
  • Released 2015/09/03.




4.5 Inch Diameter Textured Peg Balls

Quantity
Color Options:
Special Instructions
    Peg Balls

  • 90 Grit Textured Surface.
  • 4.5" Diameter.
  • Built to last with Steel Pegs.
  • Pegs are 1.25" in Diameter and protrude 3.5 inches.

  • Seamless Grip Area.

  • These guys are tough. Not as tough as the 3.5" Impossible Peg Balls (IPB's), but very hard indeed.
  • This product will challenge your open-hand grip strength and your lock off strength.
  • Balls are made with pure polyurethane.
  • Designed by Steve Dison.
  • Released 2015/09/03.
Home - Product Info - Hardware for climbing holds - Shipping Information - Climbing Wall Plans - About Us - Contact Us